Clutch Plate to Flywheel Alignment Tool

This small tool can save a big headache. It is used to align the clutch plate to the flywheel during clutch installation. If not aligned, you will get on down the assembly road to the point where you are trying to insert the torque tube (or trans axle for air-cooled) and realize it won't connect. You will then have to back up; pull the clutch fork and housing off and loosen the pressure plate bolts for a re-alignment.

For Porsche 944 (all models), 944S, 944S2, 968

For Porsche 928 (all models)

For Porsche 911 (72-98 with 23 spline clutch plate)

For Porsche 911 Turbo (76 - 91)