Noid Lite - for Bosch Fuel Injection Testing

Retail Price: $14.42

Troubleshooting a no-start doesn't have to be a weekend nightmare. This simple tester gives a go/no-go of your fuel injector harness & DME in a test that takes less than a minute. Just pull off an injector plug and insert the noid light connector. When you crank the engine, you should see the bulb light up.

Our light has a lead wire so the light can be seen from the driver's seat - no assistant needed.

And our tester has the correct connector to plug into the harness and emulate the injector's pins. No loose connections like with the generic lights. This means the our noid light can be used on a running engine and the harness wiring can be manually twisted / bent to confirm intermittent wiring problems. 

Note: the tester's wiring is delicate so its best to remove the harness connector clip during use. See pic below. 

Add to Cart:

  • Model: Bosch Type Noid-Lite
  • Shipping Weight: 0.61lbs
  • Manufactured by: ArnnWorx Specialty Tools

This product was added to our catalog on Monday 07 January, 2013.

Copyright © 2019 ArnnWorx Specialty Tools
Credit Cards Welcome
Your IP Address is:
warobbo template
Free SSL